Instructions Contents: Your Glow-Go™ comes with the following items: 1 Glow-Go™ light disc; 1 Rubber-tubed metal support; 3 Shabbos- themed night light stencils; 1 Hooked rubber suction cup Assembly: Remove your Kosher Lamp’s inner shade.Measure approx. 1-1.5 inches from the top of your Kosher Lamp’s window.Insert the metal support at this level by squeezing both pliable ends with your finger and thumb. Gently push in from both sides until the metal bracket comes in contact with the back of the lamp’s hollow area. Position your Glow-Go™ on the support bracket with the side containing the three pegs facing downward towards the light bulb. *Note: It is best to place the Glow-Go into the kosher Lamp erev Shabbos. According to most poskim, the Glow-Go should have at least a recognizable glow in order to allow returning it to the kosher Lamp during Shabbos. This can be verified by viewing the Glow-Go in a pitch black room. In most cases the Glow-Go always has a minimal glow, even when not having been put into the Kosher Lamp. Usage: Ten to fifteen minutes inside of your Kosher Lamp is generally enough time for your Glow-Go to reach its maximum brightness. When the light begins to diminish, simply return the Glow-Go to your Kosher Lamp for a few minutes. For best results, use the Glow-Go in a pitch black room, ensuring that all lights and doors are closed. The darker the room, the brighter the light will shine. Additional Features: Convert your Glow-Go into a child-friendly night light! Choose your favorite stencil from the stencil set Remove the Glow-Go from the Kosher Lamp Gently place your stencil beneath the 3 pegs of the Glow-Go. Attach the rubber suction cup to the back of the Glow-Go by slightly dampening the cup with your finger. This will allow the suction to hold longer and stronger. To straighten the stencil, adjust with your fingers. Note: The suction cup is equipped with a hook that enables the Glow-Go to sit on a table or shelf at a 45-degree angle or to be hung from a closet door. Safety & Compatibility: Be sure that when your Glow-Go light is in the Kosher Lamp’s closed position, it is never sitting on or in contact with your Kosher Lamp’s light bulb. The Glow-Go’s support bracket is specially shaped to allow the lamps heat to escape. It is recommended not to let young children play with the Glow-Go. The Glow-Go is compatible with any Kosher Lamp Max.